Skip to content
BETAThe lab is free and in beta. Found something wrong?

Level 10 of 13 · Robotics lab

Meet the robot cell

Level 10 of 13 in the Robotics lab: a free robot programming exercise at Intermediate level, which takes about 20 minutes. Walk round the whole cell, then isolate it the safe way: power off, air shut and let down, tried, and put back in the right order.

20 minIntermediateNot started

Goal

Walk round the whole cell, then isolate it the safe way: power off, air shut and let down, tried.

Done when

The acceptance test marks the skills this level practises.

  • Controller cabinet
  • Safe isolation
  • Compressed air dump
  • Restoring power and air

Skills

  • Controller cabinet
  • Safe isolation
  • Compressed air dump
  • Restoring power and air

Before you start

Level 9, Commission a servo axis, comes first. Do it first if the ideas are new to you.

Start Meet the robot cellSee all 13 levels

Free, in your browser, nothing to install. Your work is saved on this device. Updated 1 Nov 2026.

13 levels

Levels in the Robotics lab

Teach a robot arm a pick and place job and prove its handshake with the PLC.

Foundation

Levels 1 to 3
  1. Start Safe start
  2. Start Jog
  3. Start Teach and run

Programming

Levels 4 to 6
  1. Start Pick and place
  2. Start Palletising
  3. Start Machine tending

Safety and faults

Levels 7 to 13
  1. Start Safety validation
  2. Start Fault finding
  3. Start Commission a servo axis
  4. Start Meet the robot cell
  5. Start Set up the gripper air
  6. Start Prove the safety circuit
  7. Start Fault-find the cell
Previous level 9Commission a servo axisNext level 11Set up the gripper air

Part of the Robotics lab

Teach a robot arm a pick and place job and prove its handshake with the PLC.

Feeds these internships (training, not employment): PLC Programming, Commissioning and Maintenance.

About the Robotics lab

Ready for Meet the robot cell?

Free, in your browser, with nothing to install.

Start