Level 3 of 23 · PLC lab

Wire the PLC outputs

Level 3 of 23 in the PLC lab: a free PLC exercise at Foundation level, which takes about 45 minutes. Connect the output supply 2L+ and 2M, a pilot lamp, an interposing relay, a buzzer and a solenoid valve. Fit a suppression diode on the relay and the valve. Force each output and see the right device work.

45 minFoundationNot started

Goal

Connect the output supply 2L+ and 2M, a pilot lamp, an interposing relay, a buzzer and a solenoid valve.

Done when

The acceptance test marks the skills this level practises.

Skills

Wiring at Foundation level.

Before you start

Level 2, Wire the PLC inputs, comes first. Do it first if the ideas are new to you.

Start See all 23 levels

Free, in your browser, nothing to install. Your work is saved on this device. Updated 1 Nov 2026.

23 levels

Levels in the PLC lab

Program a working machine in ladder, Structured Text or SFC and watch it run.

Wire the PLC

Levels 1 to 4

Foundation

Levels 5 to 9

Intermediate

Levels 10 to 23

All 23 PLC programming exercises on one page: what each one teaches and how the marking works.

Previous level 2Wire the PLC inputs Next level 4Program and prove it

Part of the PLC lab

Program a working machine in ladder, Structured Text or SFC and watch it run.

Feeds these internships (training, not employment): PLC Programming.

About the PLC lab

Ready for Wire the PLC outputs?

Free, in your browser, with nothing to install.

Start